From: [email protected] (The Moderators)
Newsgroups: comp.sys.mac.digest
Subject: Info-Mac Digest V8 #53
Message-ID:
Date: 14 Mar 90 03:58:02 GMT
Sender: [email protected]
Reply-To: [email protected]
Organization: The Internet
Lines: 685
Approved: [email protected]
Info-Mac Digest Tue, 13 Mar 90 Volume 8 : Issue 53
Today's Topics:
"application not found" message
AMERICA ONLINE CHARGES for "Trial Package"
CD-Rom listings and Magazine
Cicn to icl8 converter
Correction: Changing Word Menus
horizontal scanning frequency of a Mac II
Info-Mac Digest V8 #48
Initshare Bug
IPA fonts
Jasmine Disk Drives
Mac 512K (Fat Mac) and hard drives.
mac drive for apple IIc
PICT file CLUTs
Project mgmt software: summary of responses
Shareware Fees (how to pay them)
Submission for comp-sys-mac-digest
TCP/IP Terminal Emulators
The HQX compression format
UNIX and the Mac
Using a Mac with an internal HD as an external HD.
Your Info-Mac Moderators are Bill Lipa, Lance Nakata, and Jon Pugh.
The Info-Mac archives are available (by using FTP, account anonymous,
any password) in the info-mac directory on sumex-aim.stanford.edu
[36.44.0.6]. Help files are in /info-mac/help. Indicies are in
/info-mac/help/recent-files.txt and /info-mac/help/all-files.txt.
Please send articles and binaries to [email protected].
Send administrative mail to [email protected].
----------------------------------------------------------------------
Date: Thu, 8 Mar 90 23:49:38 -0500 (EST)
From: Braddock John Hathaway
Subject: "application not found" message
I've been meaning to post this for a while ...
for the past month or two, I've been getting the message
"application not found" whenever I try to open a document
whose application is buried a couple of levels deep in the
HFS.
I thought that the Desktop file was supposed to keep track
of this. I've tried fixing the desktop with the application
"fix desktop" (yes, I had the "fix application list" option
checked off), but to no avail.
What am I doing wrong? Am I mistaken in any of my assumptions?
Thanks,
Brad
------------------------------
Date: Fri, 09 Mar 90 14:38:30 EST
From: "Jim Henry in Chattanooga (615) 755-4398 or 886-6425"
Subject: AMERICA ONLINE CHARGES for "Trial Package"
I also tried America OnLine as a free trial and decided it was not
what I wanted to pay for. I also got a charge on my credit card.
I called America OnLine's phone # and was irate.
The woman I spoke with tried to explain something that was in the fine
print that I didn't bother to pay attention to, and then said,
"Do you want to cancel your subscription?"
I said, "Yes."
She said, "I'll cancel it for you and issue a refund to your charge card."
Well, that certainly defused the situation.
So, if you're mad at America OnLine, just call and ask for cancel & refund.
JIM
Jim Henry
* JHENRY at UTCVM (BITNET) * School of Engineering *
* (615) 755-4398 (office) * UTC (Univ. of Tenn. at Chatt.) *
* (615) 886-4398 (home) * Chattanooga, Tennessee 37403 *
* (615) 755-4025 (FAX) * U.S.A. *
------------------------------
Date: Fri, 09 Mar 90 11:41:01 EST
From: RNDINB@isec-oa
Subject: CD-Rom listings and Magazine
Frank Steele asked where to find a listing of available CD-Roms. I regularly
receive a magazine called: CD-ROM End User. It is published monthly by
DDRI, Inc, 510 N. Washington St., Suite 401, Falls Church, VA 22046-3537
Phone (703) 237-0682, Cost $40. but if you qualify it can be free.
They also have started a Publication called "CD-Rom Shoppers Guide".
Same address, published qtrly, cost is $12.95.
I have found End User useful but it does as does the market tend to lean
toward the DOS CD-Rom users. (My Opinion...for what its worth, hope this
helps...Bob)
CPT Bob Brandel, AV 345-3791/90, CML (703) 355-3791/90
profs: RNDINB Email RNDINB @ Melpar-emh1.army.mil
**** End of Profs Note ****
------------------------------
Date: Thu, 8 Mar 90 22:56 PST
From: JOHN LOUCH
Subject: Cicn to icl8 converter
Hello Netters,
I'm looking for an cicn to icl8 converter. If there isn't
one out there lets get together and make one. I do not want to
lose my cicn when system 7.0 finnaly rolls around, and I would like
to usae them with SunDesk.
Please reply directly to me and I will summarize to the net.
John Louch [[email protected]]
Disclaimer: ID=28
------------------------------
Date: Fri, 9 Mar 90 15:15 CDT
From: BENSMANM%[email protected]
Subject: Correction: Changing Word Menus
How to get more space to the right of the Microsoft Word( 4.0 Menu.
This allows you to see "Superclock(", "Macro(", or other DA's which
put their names to the right of the menu (such as "KeyCaps(",
"Word Finder(","EndNote(," etc. on a standard "small" screen.
Using a Hex or ASCII editor, such as "MacTools(" or "FeditPlus(",
open Microsoft Word( 4.0 Sector 373. You will see the words from the
Microsoft Word menu: .File.Edit.Format.Font.Document.Utilities.Window,
and if you use it .Work.
In Hex, the . (period) before each term represents the number of letters in the
following menu item.
So, to reduce the size of the menu word "Document", change the Hex number
showing as a period preceding the word, Document, from 08 to 04 and then remove
-ment- with "0"
(or space-bar in ASCII) leaving Docu (which is four letters).
You can do the same for any of the other menu terms.
It is important to change the number prior to the term to recover
the extra spaces the letters you remove would take up because the
following menu item will not move to the left without that reduction.
I have performed this on a version of my program, with no ill effects.
Marvin R. Bensman, J.D., Ph.D. "same disclaimer"
------------------------------
Date: Fri, 9 Mar 90 19:50:17 GMT
From: [email protected]
Subject: horizontal scanning frequency of a Mac II
Hi,
Does somebody knows about the horizontal scanning frequency of a Mac II?
Because we have a Dunn Instrument MultiColor camera and we would like to plug itto one of our Mac.
Thanks for all your answers,
Guillemette.
Guillemette Doutriaux
CSI A-021
UCSD
La Jolla CA 92093
"doutriaux%[email protected]"
------------------------------
Date: 9 Mar 90 10:45:00 EST
From: [email protected]
Subject: Info-Mac Digest V8 #48
Greetings. I have just started to program the MacIntosh and I Have
been running into some problems. I am using MPW 3.0 and Pascal 3.0.
What I am trying to do is to copy a pixel map from the current window to
memory. What I Have done is this :
MemPixMap := NewPixMap;
CopyPixMap(MyCWindow^.PortPixMap,MemPixMap);
I then allocate memory for the Base Address and try the next line
CopyBits(MyCWindow^.PortPixMap^^,MemPixMap^^,WindowRect,OtherRect,
srcCopy,NIL);
When I Compile I get this:
CopyBits(MyCWindow^.PortPixMap^^,MemPixMap^^,WindowRect,OtherRect,
# ?
### Pascal-Error 144 Type conflict of operands
# ?
### Error 144 Type conflict of operands
It Says in Inside Macintosh V5 Page 70 that CopyBits can now take a Pixel Map.
Is this not supported by the MPW Pascal 3.0 Compiler ?
Is there something that can be done ?
Am I just being stupid ?
Any Help would be greatly appreciated.
Thanks,
Jim Wetherbee
{BTW Any Good Reference Books on ToolBox Programming besides
Inside Macintosh and Macintosh Revealed? }
------------------------------
Date: 9 MAR 90 22:45:46.95-GMT
From: VEDRINE%[email protected]
Subject: Initshare Bug
In a recent Info-Mac digest, somebody ask about Initshare folder selection
process.
1) the first thing to know is that InitShare present you the classic SFGetFile
Dialog and you must select A FILE IN THE FOLDER YOU WANT TO BE USED BY
INITSHARE.
2) There is a bug in the version submited to the info-mac archives
In source file cdev.p
Change Line 108 from:
ioDrDirID := 0; , use working directory reference number
to:
ioDrParID := 0; , use working directory reference number
And compile all the sources using MPW in order to get a corrected Initshare
file.
Jean-Michel Vedrine ([email protected])
Centre informatique Trefilerie
Universite de Saint Etienne
FRANCE
------------------------------
Date: Fri, 09 Mar 90 13:44:52 EST
From: "Sue Hay (tm)"
Subject: IPA fonts
There are numerous IPA fonts available on the Macintosh. Bitmapped fonts
are produced by: Ecological Linguistics, Linguist's Software, Inc.,
Devonian International Software Company, Paul Rappaport, and Megatherium
Enterprises. LaserWriter fonts are produced by: Ecological Linguistics,
Linguist's Software, Inc., Devonian International Software Co.,and
Neoscribe International. For further details and contact information
on the above products, see the Macintosh Buyer's Guide or MENU. Contact
information for all of the above companies is there except for Ecological
Linguistics; you can contact them at P.O. Box 15156, Washington, DC, 20003.
Examine these fonts carefully before choosing one, as they have a broad
range of features and limitations as well as prices.
Disclaimer: I am not affiliated with any of the above companies. This
listing should not be considered an endorsement. I just looked the info
up, guys, I haven't used the fonts!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Susan E. Hay *
* User Services Specialist - Mac Support *
* Computing & Information Services phone: 401-863-7302 *
* Brown University internet: [email protected] *
* Box 1885, 115 Waterman Street bitnet: suehay@brownvm *
* Providence, RI 02912 applelink: suehay *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
------------------------------
Date: 9 Mar 90 17:09:10 GMT
From: [email protected] (Saul Levy)
Subject: Jasmine Disk Drives
I am new to this bboard, so it's possible this has all been said
before. If not, Jasmine Technologies has the poorest (deservedly)
customer relations policy of any company I've ever dealt with. I have
been trying for three weeks to find out about an 80 meg hard disk
ordered from them (in response to an ad which was still running last
week). A typical phone session (on a pay toll call) lasts 8 minutes
while I am either put on hold or switched to another extension to be
out on hold, after which I get a telephone answering machine whose
message asures me that my call is important to them, and that they
will get back to me the next day if I leave the pertinent information.
I do -- they don't. Two weeks ago, after 5 days of calling, I
actually spoke with a human rather than a machine. He was from
accounting (helping out) and he checked and told me my machine would
be sent express on March 4 (a sunday). Today, March 9, it's still not
here and I still get the same runaround from their phone system.
Does anyone know if they really exist, and if they really manufacture
(ie assemble) disk drives? Does anyone know anyone who has taken
delivery of such a beast? It got a 5 mouse rating in Macuser's
article on disks in February issue. Did they actually try one, or did
they just listen to someone who claimed to have seen one?
If this sort of treatment appeals to you, by all means deal with
Jasmine. If not, I suggest you look elsewhere.
------------------------------
Date: 9 Mar 90 11:20:00 EST
From: [email protected]
Subject: Mac 512K (Fat Mac) and hard drives.
This has probably been asked before, but I hope that the general
readership is patient.
How does one get a hard drive hooked to a 512K Mac. I'm asking about
the old ones with the 64K ROMs and no SCSI port. I thought that Apple
had sold hard drives for these machines at one time. For cost reasons I
would like to avoid upgrading the Mac. (I understand that requires a
new mother board for these models.)
And a question to the moderators. I looked in the archives for the
past issues of info-mac that might cover this topic. I could only find
volumes 7 & 8. Are the rest kept somewhere or is all that neat
information lost forever to the world?
I'm asking this question for a friend so please reply to me. If anyone
else is interested I'll be more than happy to send you the
information. Thanks in advance!
Kurt Seiffert
Macintosh Facilities Coordinator
University Computing Services, Indiana University, Bloomington, IN
[email protected]
[Old issues of the digest are lost forever, I'm afraid. We don't have the
disk space to keep them around or enough time to reload them from tape
for people. Sorry! -Bill]
------------------------------
Date: Fri, 9 Mar 90 08:47 CST
From: Alexander Rubli
Subject: mac drive for apple IIc
Does anbody knows how to connect an old mac 400 k drive to an apple ][c?
thanx
RUBLI@UDLAPVMS
alexander
------------------------------
Date: 9 Mar 90 13:08:15 PST (Friday)
From: "Richard_K._Yardumian.ESM8"@xerox.com
Subject: PICT file CLUTs
I'm writing a program that reads and displays PICT(version 1 & 2) files.
The PICT files I'm dealing with contain PixMaps via Quickdraw opcode 0x98.
I've used the QuickDraw function DrawPicture to read the PICT file into
windows, offscreen PixMaps, and GWorlds. In all cases the PixMap data is
read in correctly, unfortunately DrawPicture appears to do nothing with the
PICT file's PixMap clut. That is, when the data is displayed in a window,
the colors don't look right. When I explicity interpret the PICT file
myself and read the PixMap clut into a palette, then the colors look
correct.
So my question is, does DrawPicture, or any other function, process a CLUT
in a PixMap of opcode 0x98/0x99 of a PICT file? Or, will I have to
interpret the PICT file myself to use the CLUTS?
Thanks
/Rick
------------------------------
Date: Fri, 9 Mar 90 16:35:58 EST
From: eric%[email protected] (Eric Brunelle)
Subject: Project mgmt software: summary of responses
Bonjour,
A week ago I submitted a request about project management software for
the Mac. This is the summary of replies I got to date. Thanks to all who
answered. Ken Sussmann also sent me a complete feature checklist of the
MicroPlanner product (both X-pert and 6.0 versions). I have not included
this here because it's 250 lines long; email me directly for a copy.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
There are two primary suppliers of project management SW on the Mac. Claris
with MacProject II and Micro Planning International with MicroPlanner. We
have used both. MacProject is relatively easy to use and can easily handle
projects of simple to moderate complexity. It has been the SW of choice for
most people at our center.
MicroPlanner is targeted for much larger projects, and seems particularily
aimed at production and manufacturing (all of their examples in their manuals
are from the constuction industry). We have found their original program
difficult to use with a very non-intuitive user interface that violates the
Mac interface guidelines at every opportunity (1/2
). It is somewhatdifficult to set up for R&D projects which frequently change. It only
supports precidence diagrams (activity on the arc) rather than arrow diagrams
(activity at the nodes).
However, they just released MicroPlanner Xpert (~$2000 list). We had a
demonstration of it when it was in Beta, and it looks like one serious piece
of planning software! It is completely rewritten with an excellent Mac
interface. It provides complete report customization. It allows for either
arrow or precidence diagrams. It automatically generates C/SSR reports (neede
for US Government cost reports, which we need). While it is pricy, it looks
capable of handling anything that mainframe planning tools (eg. ARTEMIS) can
do. Our Buisiness Administration Department is getting a copy on trial, but I
haven't heard their reaction after actually using it.
Ken Hoyme Honeywell Systems and Research Center
(612)782-7354 3660 Technology Dr., Minneapolis, MN 55418
Internet: [email protected]
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Our office has standardized on MicroPlanner Plus Version 6 and is
currently upgrading to use MicroPlanner X-Pert. We tried using
MacProject but found it to be virtually useless. We have not
tried MacProject II, but from the advertising, MicroPlanner
X-Pert is far superior. Another fellow in our office is
currently writing up a summary of the features available in
X-Pert and he will send you a copy in about a week.
Ken Sussmann
U.S. Army Production Base Modernization Activity
Picatinny Arsenal, New Jersey 07806-5000
[email protected]
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Hi, a package I haven't used yet but really like the look of is:
Micro Planner from Micro Planning International
235 Montgomery St
Ste. 840
San Francisco, CA 94104
415-788-3324
Good luck,
=--> CB Lih From: Joshua Yeidel
> This kind of system would make it very mcuh easier to pay shareware
> fees in our environment (a state university), where it can cost as
> much as $35 just to write a check (not to mention the back-and-forth
> paperwork).
My solution to this particular problem (bureaucracy in purchasing) is
to make small purchases myself and then apply to the department for
reimbursement. This way I can
* get things quickly (overnight express from mail-order firms)
* batch several small payments (to reduce paperwork)
* etc.
You might see if this approach will work in your environment.
=Spencer ([email protected])
------------------------------
Date: 9 Mar 90 03:11:59 GMT
From: dcatla![email protected] (Michael L. Kornegay)
Subject: Submission for comp-sys-mac-digest
Path: dcatla!zdmlk
>From: [email protected] (Michael L. Kornegay)
Newsgroups: news.newusers.questions,comp.sys.mac,comp.sys.mac.digest
Subject: Mac uucp/email/usenet Summary
Message-ID:
Date: 9 Mar 90 03:11:58 GMT
Reply-To: [email protected] ()
Followup-To: [email protected]
Distribution: na
Organization: n/a
Lines: 34
Here is the summary of respones and information I hunted down on
Macintosh uucp/email/usenet software. It was disappointing that
only two people responed to my request posting, especially considering
the large number of Macintosh postings in the Mac news groups. I
can not believe that all these Mac users settle for an interface
like rn provides to access usenet.
Summary:
Microsoft Mail, Microsoft, 206-257-5480.
Third parties provide gatway software to Unix via SMTP and Ethernet.
Microsoft is reported to have a uucp gateway that they are using
internally, maybe they will consider it as a future product.
Quickmail, CE Software, 515-224-1995.
This product reportedly has capabilities and third party gateways
into a large number of diverse mail systems.
UMCP/QM, Information Electronics, 607-257-5480,
INFOELECT%[email protected].
This product is a uucp gateway for Quickmail to be available late March.
This looks like the solution for me. Their product fact sheet looks
interesting, I look forward to seeing the product.
MacWEEK, 6 March 1990
This issue contained a comparison of Microsoft Mail and Quickmail as
well as several other interesting email related issues for the Mac
user.
Thanks to those that responded. If anyone has any additions of Mac like
interfaces to uucp/email/usenet, please send me email and I will
summarize to net as appropriate.
--
Please respond via email, I will summarize to net when appropriate, thanks.
Michael Kornegay, [email protected]
------------------------------
Date: Fri, 9 Mar 90 01:29:27 est
From: Amanda Walker
Subject: TCP/IP Terminal Emulators
Peter Hardman writes:
> Does anyone know of any good TCP/IP emulators. PDomain or Comercial
> At the moment I am using NCSA Telnet which is Okay. What I really need is
> something that will work over the Ethernet but has the same Graphics
> capability as VersaTerm Pro.
My company sells a driver which installs into VersaTerm or VersaTerm Pro and
allows them to operate over a Telnet connection.
For more information please contact InterCon Systems Corporation directly at
703.709.9890 (voice) or 703.709.9896 (FAX). List price is US$149.00, with
a 30% discount to educational institutions.
Amanda Walker
InterCon Systems Corporation
------------------------------
Date: Thu, 8 Mar 90 16:23 PDT
From: COLVILLE%[email protected]
Subject: The HQX compression format
Hello, my name is Scott Colville, and I'm a junior at Catlin Gabel High School,
a private school in Portland, Oregon. A classmate of mine got hold of the
mac server, and asked me to make a program uncompress '.HQX' files. I have
the Mac version of this BinHex program, but there are some commands in this
progarm unique to the Mac. Right now our computer system consits of a Vax, VMS,
but we are expecting a Sequent, a UNIX system, by April. Well back to the point
I am trying to make a VAX, pascal, version of this program but I can't find
the algorithm in the program I have.
I would appreciate it if you could send me a message describing this algorithm
to me, I would greatly appreciate it.
Thanks, Scott Colville
------------------------------
Date: 9 Mar 90 20:08 -0600
From: Darren R Besler
Subject: UNIX and the Mac
Is there anything out there that allowes connecting to a UNIX box as
a terminal and also allows file upload/download so that we can do the
editting on the Mac. We would like this process to be as slick as
possible.
Any Ideas?
------------------------------
Date: Thu, 8 Mar 90 23:50 EST
From: CHGARNETT%[email protected]
Subject: Using a Mac with an internal HD as an external HD.
Hello, all.
Does anyone out there know of a way that I can connect two Macs together
through their SCSI ports so that one of them acts like an external HD to
the other? I'd have to reset the SCSI address on one of them, but that's
not a problem. I'd really like to be able to load an HD from a master copy
on my IIcx's internal HD, and doing across TOPS or something like that is
really slow.
Thanks!
Craig Garnett
Microcomputer Specialist
Amherst College
CHGARNET@AMHERST (BITNET)
------------------------------
End of Info-Mac Digest
******************************