INFO-MAC Digest V4 #130
Posted: November 12th, 1986, 2:16 am
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!decvax!ucbvax!SUMEX-AIM.ARPA!INFO-MAC-REQUEST
From: [email protected] (Moderator David Gelphman...)
Newsgroups: mod.mac
Subject: INFO-MAC Digest V4 #130
Message-ID:
Date: Sun, 12-Oct-86 15:25:00 EDT
Article-I.D.: ucbvax.8610122009.AA09395
Posted: Sun Oct 12 15:25:00 1986
Date-Received: Sun, 12-Oct-86 18:08:27 EDT
Sender: [email protected]
Reply-To: [email protected]
Organization: The ARPA Internet
Lines: 511
Approved: [email protected]
INFO-MAC Digest Sunday, 12 Oct 1986 Volume 4 : Issue 130
Today's Topics:
RAMSDOpen with Lightspeed
Re: Fragmentation Problem
LSC with HFS
Creating MS-Basic Library Programs??
Profiles and MacWorks
Usenet Mac Digest V2 #83
Delphi Mac Digest V2 #51
Disk Verify
Re: MacKermit Fonts
FanMania (Really, Mac's operating temp)
fans
Rentals Registration
Japanese Word Processing on Mac
MacApp Developer's Association
Requesting info on new faster Laserwriter?
Looking for DS Disk Bulk Copier
Woke up this mornin', got them blue-bashin' blues.
----------------------------------------------------------------------
Date: Fri, 10 Oct 86 11:40:04 edt
From: [email protected] (Richard Siegel)
Subject: RAMSDOpen with Lightspeed
The SERD file >is
Subject: Creating MS-Basic Library Programs??
We'd like to be able to write number-crunching subroutines (such as Fast
Fourier Transforms, root finders, etc.) in Pascal, C, or even MS Fortran;
compile them; and then convert the compiled code into library members that
would be CALLable from Microsoft Basic.
We have a few pages of documentation that came from Microsoft (not sure exactly
where) on how to convert assembly code into Basic library members; but nothing
that goes beyond this.
Can anyone offer advice on this, summarize personal experience, or point to
other sources of information? (While we're at it, can anyone say anything on
status of a compiled MS Basic?)
------------------------------
Date: Fri, 10 Oct 86 01:19 CDT
From:
Subject: Profiles and MacWorks
I heard about a company (in Utah, I think) that offers patches to
MacWorks to let you use two Profiles instead of one. Having
10Mb instead of just 5Mb sounds pretty appealing to me. Anybody
out there know the scoop? Is this place for real?
Greg Marriott
%-b
The MacHax(tm) Group
Send replies to [email protected]
------------------------------
Date: 12 Oct 86 10:20:23 EDT
From: Jeffrey Shulman
Subject: Usenet Mac Digest V2 #83
Usenet Mac Digest Sunday, 12 October 1986 Volume 2 : Issue 83
Just when you thought is was safe... (Microsoft Copy Protection)
Re: Imagewriter II Transparancies
Re: Memory compactification runs drive??
Request for digitizer information
Re: Print Selection... menu item in editors and other applications
Re: MacWrite document problem
Converting MacPaint pictures to the IBM PC
new book: The Macintosh Advisor:
Essential Techniques for Experienced Users
SCSI Interface / MaxRam Compatibility
Cut-sheet bin (feeder)
Re: ETH Modula2 Single Pass (how to access the tool-box)
desktop publishing
Re: Converting MacPaint pictures to the IBM PC
Using Imagewriter for other PC's
Re: Request for digitizer information
SCSI hard disks
MacMan Database
info request: Unix, nroff, TeX, EMACS
Re: SCSI hard disks
Re: Editable text items in Dialogs
SetEventMask Buggy?
Fixing games that reboot
Re: Using Imagewriter for other PC's
MacPublisher II Crashes
Clip Art request
Re: HP LaserJet Driver?
Re: Wanted: Small C for the 68000
page sizes on Imagewriter and Laserwriter
Serial Driver Question
Re: MacApp status ?
[ archived as
[SUMEX-AIM.Stanford.EDU]USENETV2-83.ARC
DAVEG
]
------------------------------
Date: 12 Oct 86 10:21:13 EDT
From: Jeffrey Shulman
Subject: Delphi Mac Digest V2 #51
Delphi Mac Digest Sunday, 12 October 1986 Volume 2 : Issue 51
Today's Topics:
RE: Versions in the night... (Re: Msg 13522)
RE: Radius FPD (Re: Msg 13555)
RE: Beep on startup (Re: Msg 13542)
DA Installer + (2 messages)
RE: Davong 10MB Hard Disk
RE: DataFrame spooler problems.. (Re: Msg 13527) (2 messages)
disk initialization bug? (2 messages)
MACazine errors
AST 2000 tape backup problem
HORIZONTAL lines!?! (3 messages)
IBM MultiMate to MSWord...
A better disk performance analyser...
Non-ejectable volumes
Problem with SCSI HD
PageMaker 2.0 (3 messages)
Alisa = VAX + Mac
100mb SCSI
RE: 100mb SCSI (Re: Msg 13645)
Micah Drive still around? (2 messages)
Fast Printer (2 messages)
Heap Fragmentation Problem
RE: Cooling fans
INIT 31 mechanism (3 messages)
s/w dev tools
HyperDrive FX/20
code segments (2 messages)
Usenut Digest Vol. 3 #54
[ ARCHIVED AS
[SUMEX-AIM.Stanford.EDU]DELPHIV2-51.ARC
DAVEG
]
------------------------------
Date: 12 Oct 86 11:02:33 EDT
From: Jeffrey Shulman
Subject: Disk Verify
[ Uploaded from Delphi by Jeff Shulman ]
Name: DISK VERIFY
Date: 11-OCT-1986 16:30 by HSTARR
Here is a handy utility to check the formatting of your diskettes. It is non
destructive, and will check non-Macintosh (but Apple formatted) diskettes. This
will allow you to determine if those single sided disks really can be used as
double sided. Also good for a double check after a few days. Send comments and
suggestions to HSTARR.
[ ARCHIVED AS
[SUMEX-AIM.Stanford.EDU]UTILITY-DISKVERIFY.HQX
DAVEG
]
------------------------------
Date: Fri, 10 Oct 86 08:16 EST
From: CML5A9%[email protected]
Subject: Re: MacKermit Fonts
There was recently a question about Kermit fonts and
their readability.
I have taken head responsibility for the MacKermit
project, which has not been worked on in a year.
We are currently converting it to a native Mac C compiler
(Prototyping in Lightspeed C with final product in MPW C)
and are going to add the Kermit sliding window protcol,
TEK4010 support (we hope), as well as cleaning up some
of the Mac Plus incompatabilities. We can certainly look
into the font problem, and this is just a guess but I
would imagine that the original font was intended to
"emulate" the look of a VT100. If it isn't all that
close I could certainly mess with it a bit. It could
simply be changed with ResEdit if it bothers you now.
However, Geneva 10 (as was suggested) will not work, as
Kermit requires a monospaced font...
If anyone else out there has something to contribute to
the MacKermit project, feel free to drop me a line and
we'll see what you can do. The project is currently
myself and one other person, but we are going to probably
pick up a third in a bit. This is going to be some
high powered Mac and C work, so don't jump on the boat
just for fun.
We don't have a tentative release date yet, but I am
hoping to have the code native by next week sometime.
-Tom Dowdy
[email protected]
"I am increasinly of the opinion that a vast majority
of wrong thinking people are right."
------------------------------
Date: Thu, 9 Oct 86 21:38:26 cdt
From: [email protected] (Wiley Sanders)
Subject: FanMania (Really, Mac's operating temp)
Reply-to: [email protected] (Wiley Sanders)
Well, I took a dial-type photo thermometer and laid it level along the left
hand vent of several different Macs and Mac Pluses here in our microlab.
The 512K's seem to run about 130F. and the Pluses about 115.
-w
------------------------------
Date: Sat, 11 Oct 86 12:53:01 edt
From: Christopher North
Subject: fans
*** REPLACE THIS LINE WITH YOUR MESSAGE ***
I have been using a system saver mac from kensington ($65 from maconnection)
and I love it. Prior to using I had two power board failures presumably heat
related as they both occurred during heavy usage perids. Sure, it makes a
little bit of noise but it is nothing that bothers me. It sits very snugly
on top of the mac but I do not have to remove it during transport because
it fits right in my mac pack.
------------------------------
Date: Tue, 7 Oct 86 15:05 EDT
From: JDM%SMVL%[email protected]
Subject: Rentals Registration
I take it back. No sooner do I post my story than the Lightspeed C and
Pascal Registration cards/Licenses appear in a battered envelope in my
mailbox. Apparently, they were mailed quite promptly by MacRentals. They
were probably mishandled by the good 'ol US Mail people. So, I can now
use the tools without guilt.
Joe
------------------------------
Date: Fri, 10 Oct 86 21:53:48 jst
From: nttlab![email protected] (Hisao NOJIMA)
Subject: Japanese Word Processing on Mac
Hello
I read Tamir Weiner on Japanese WordProcessor on Mac. I am a Mac
user living in Japan.
As Tamir wrote, KANJI-Talk is a kind of software adaptar for Mac,
which allows user to use Kanjis in several Mac applications. (Excel,
MacWrite, MacPaint and others)
We have a Word Processor for Mac, EGword from ErgoSoft. I have
tried it on Mac512, but not on Mac+. (I have to upgrade the software,
but I haven't done so.)
EGword on Mac512 worked well, but as the quality of the printed drafts
were quite low and slow (you have to wait about four or five minutes to
get only one page of printouts), so I didn't use it seriously.
But, now you can use EzPrint (from Hi-TECS), which allows you to
print EgWord files to Kanji printers (EPSON VP-80K, VP-130K), so
accordingly you can get high quality output quickly.
I hope Apple Japan or some other companies try hard to make it
possible to print Kanji files to LaserWriters. (and we need mcuh
bigger screen and finer resolution. Most Japanese personal computers
have 640 * 400 pixels, on which we can display 40*25 kanjis, however,
on Mac we can display about 23*13 kanjis.)
Until then, Japanese word processing on Mac may remains far back
behind with contenporary levels of Japanese Word Processing softwares,
like ICHI-TAROU, which is the best selling word processing software
for NEC PC9800.
Hisao NOJIMA
------------------------------
Date: Fri, 10 Oct 86 01:21 CDT
From:
Subject: MacApp Developer's Association
Here it is, just like I promised.
Announcing the MacApp Developer's Association.
MacApp users are proud to announce the formation of the MacApp Developer's
Association. Our goal is to provide technical support and information
to our fellow developers who are using Object Oriented Programming
languages. We will publish a regular (hopefully monthly) newsletter
addressing the concerns of MacApp users. We will provide, maintain,
and support an Object Library for developers. As a developers
association we feel it is important to provide an informal electronic
mail Q&A service for out members where you can get answers to your
MacApp questions. We will provide support for the formation of local
MacApp user groups.
Our original organizing effort is supported by Apple Computer but we
anticipate being a fully indepenent organization through your participation
and support. We are looking for volunteers able to contribute to the
above efforts. If you have an article, an idea for an object, or a
tutorial to contribute to the newsletter you should contact Eric
Anderson (addresses are listed below). If you wish to contribute an
object to the Object Library contact Kurt Schmucker concerning documentation
details. If you would like to participate in the Q&A service contact
Greg Marriott or Scott Boyd. If you wish to form a local support group
or are looking for local support contact Carl Nelson.
To receive the first 6 newsletters we are asking that you make a contribution
of $15 to cover the costs of its printing, production and postage. Send
your name, address, and check to the MacApp Developers Association.
Details concerning access and distribution of the object library will
be published in our first newsletter. Tentatively the Q&A service will
be conducted using MCI mail. The cost to join is low, there are no
connect charges and the price to send a short, well phrased question is
a dollar or less; contact MCI at 1-800-MCI-MAIL to obtain an account.
The MCI mail ID is MacApp Questions. The most useful Q&A's will appear
in each newsletter.
We hope to hear from you and look forward to seeing you at our next
meeting, to be held during the January 198 MacWorld Expo in San Francisco.
-
MacApp(tm) Developer's Association
P.O. Box 23
Everett, WA 98201-0023
MCI: Carl Nelson
USENET: uw-beaver!tikal!sunup!chn
Greg Marriott/Scott Boyd
3420 D Sandra St.
Bryan, TX 77801
MCI: MacApp Questions
Greg Marriott
BITnet: [email protected]
[email protected]
[email protected]
CSNet: boyd%[email protected]
general:boyd%tamlsr%[email protected]
Kurt Schmucker
PPI
2516 Vineyard Lane
Crofton, MD 21114
BIX: kschmucker
Eric Anderson
P.O. box 1145
Montpelier, VT 05602
MCI: Tomevs
-
Greg Marriott
%-b
-
Whew. Disclaimer: I have no official connection with Apple Computer.
I'm not getting paid to do this. I'm paying my
$15 just like every other member.
------------------------------
Date: Sat, 11 Oct 86 01:26:46 EDT
From: cordy%[email protected]
Subject: Requesting info on new faster Laserwriter?
I have heard rumours that Adobe has created a new fast 68020-based
controller to go into Laserwriters and such. I presume this means
that we will shortly see announcements of a Laserwriter II or somesuch,
rendering the present Laserwriter obsolete (or at least slow).
Does anyone have any solid information on the existence and predicted
birth date of such as beast? I want to know if we should wait for it or
go ahead and shell out the bucks for the present slow Laserwriter.
Thanks in advance
Jim Cordy [email protected]
Dept. Computing and Information Science decvax!utcsri!qucis!cordy
Queen's University at Kingston
Kingston Canada
------------------------------
Date: 11 Oct 1986 15:22-EST
From: [email protected]
Subject: Looking for DS Disk Bulk Copier
I have been given the task of creating about 50 double-sided disks for
public use in clusters here at Carnegie Mellon. The disks are made up
and contain invisible files and other such nonsense. Does anyone know
of a PD or cheap commercial bulk double-sided disk copier? It should be
a 'read master disk and then feed in blanks' based system. It doesn't
have to deal with any protection - just a normal sector copy should do.
I have an old PD program called MassCopy, but it doesn't seem to know
how to deal with double sided disks. Any help is appreciated.
Also - I want some of the files on the disk (namely Paint and Write) to
not be able to be drag copied by J Random User. But the bozo bit
doesn't seem to do anything on an HFS volume - any help here?
Thanks, Marc
------------------------------
Date: Fri, 10 Oct 86 09:21 EDT
From: CNNMJ%[email protected] (M.J. CONNOLLY
Subject: Woke up this mornin', got them blue-bashin' blues.
My 10 September issue of Punch just arrived. Punch, you ask? Well, you
see, when Michael Bywater is in form, his Database page does wonders
for one's spirits. Like the following excerpt from his Q/A discussion
on the Amstrad PC-1512, which costs eight to ten times less than a
similarly configured IBM PC, runs pretty much all the PC stuff along
with its own GEMware, and is faster. The cherry comes at the bottom
of the glass:
> What reason, then, is there to buy a real IBM?
> --Absolutely none whatever.
>
> What will this mean for IBM?
> --The bum's rush; and, my goodness, they've had it coming to them
> for a long time.
>...
> So to sum up?
> --If you want an IBM PC, buy an Amstrad. If you already have an
> IBM PC and want another one, buy an Amstrad. If you haven't got
> a computer at all and don't want to spend much, buy an Amstrad.
> If you haven't got a computer but vaguely feel one would be useful,
> don't buy anything; wait until you have good reason to buy one,
> then buy an Amstrad. If you don't mind spending L2,000 and want the
> best computer on the market right now, buy an Apple Macintosh Plus.
Prof M.J. Connolly
Slavic & Eastern Languages
Boston College/Carney 239
Chestnut Hill MA 02167 (617) 552-3912 [email protected]
------------------------------
End of INFO-MAC Digest
**********************
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!decvax!ucbvax!SUMEX-AIM.ARPA!INFO-MAC-REQUEST
From: [email protected] (Moderator David Gelphman...)
Newsgroups: mod.mac
Subject: INFO-MAC Digest V4 #130
Message-ID:
Date: Sun, 12-Oct-86 15:25:00 EDT
Article-I.D.: ucbvax.8610122009.AA09395
Posted: Sun Oct 12 15:25:00 1986
Date-Received: Sun, 12-Oct-86 18:08:27 EDT
Sender: [email protected]
Reply-To: [email protected]
Organization: The ARPA Internet
Lines: 511
Approved: [email protected]
INFO-MAC Digest Sunday, 12 Oct 1986 Volume 4 : Issue 130
Today's Topics:
RAMSDOpen with Lightspeed
Re: Fragmentation Problem
LSC with HFS
Creating MS-Basic Library Programs??
Profiles and MacWorks
Usenet Mac Digest V2 #83
Delphi Mac Digest V2 #51
Disk Verify
Re: MacKermit Fonts
FanMania (Really, Mac's operating temp)
fans
Rentals Registration
Japanese Word Processing on Mac
MacApp Developer's Association
Requesting info on new faster Laserwriter?
Looking for DS Disk Bulk Copier
Woke up this mornin', got them blue-bashin' blues.
----------------------------------------------------------------------
Date: Fri, 10 Oct 86 11:40:04 edt
From: [email protected] (Richard Siegel)
Subject: RAMSDOpen with Lightspeed
The SERD file >is
Subject: Creating MS-Basic Library Programs??
We'd like to be able to write number-crunching subroutines (such as Fast
Fourier Transforms, root finders, etc.) in Pascal, C, or even MS Fortran;
compile them; and then convert the compiled code into library members that
would be CALLable from Microsoft Basic.
We have a few pages of documentation that came from Microsoft (not sure exactly
where) on how to convert assembly code into Basic library members; but nothing
that goes beyond this.
Can anyone offer advice on this, summarize personal experience, or point to
other sources of information? (While we're at it, can anyone say anything on
status of a compiled MS Basic?)
------------------------------
Date: Fri, 10 Oct 86 01:19 CDT
From:
Subject: Profiles and MacWorks
I heard about a company (in Utah, I think) that offers patches to
MacWorks to let you use two Profiles instead of one. Having
10Mb instead of just 5Mb sounds pretty appealing to me. Anybody
out there know the scoop? Is this place for real?
Greg Marriott
%-b
The MacHax(tm) Group
Send replies to [email protected]
------------------------------
Date: 12 Oct 86 10:20:23 EDT
From: Jeffrey Shulman
Subject: Usenet Mac Digest V2 #83
Usenet Mac Digest Sunday, 12 October 1986 Volume 2 : Issue 83
Just when you thought is was safe... (Microsoft Copy Protection)
Re: Imagewriter II Transparancies
Re: Memory compactification runs drive??
Request for digitizer information
Re: Print Selection... menu item in editors and other applications
Re: MacWrite document problem
Converting MacPaint pictures to the IBM PC
new book: The Macintosh Advisor:
Essential Techniques for Experienced Users
SCSI Interface / MaxRam Compatibility
Cut-sheet bin (feeder)
Re: ETH Modula2 Single Pass (how to access the tool-box)
desktop publishing
Re: Converting MacPaint pictures to the IBM PC
Using Imagewriter for other PC's
Re: Request for digitizer information
SCSI hard disks
MacMan Database
info request: Unix, nroff, TeX, EMACS
Re: SCSI hard disks
Re: Editable text items in Dialogs
SetEventMask Buggy?
Fixing games that reboot
Re: Using Imagewriter for other PC's
MacPublisher II Crashes
Clip Art request
Re: HP LaserJet Driver?
Re: Wanted: Small C for the 68000
page sizes on Imagewriter and Laserwriter
Serial Driver Question
Re: MacApp status ?
[ archived as
[SUMEX-AIM.Stanford.EDU]USENETV2-83.ARC
DAVEG
]
------------------------------
Date: 12 Oct 86 10:21:13 EDT
From: Jeffrey Shulman
Subject: Delphi Mac Digest V2 #51
Delphi Mac Digest Sunday, 12 October 1986 Volume 2 : Issue 51
Today's Topics:
RE: Versions in the night... (Re: Msg 13522)
RE: Radius FPD (Re: Msg 13555)
RE: Beep on startup (Re: Msg 13542)
DA Installer + (2 messages)
RE: Davong 10MB Hard Disk
RE: DataFrame spooler problems.. (Re: Msg 13527) (2 messages)
disk initialization bug? (2 messages)
MACazine errors
AST 2000 tape backup problem
HORIZONTAL lines!?! (3 messages)
IBM MultiMate to MSWord...
A better disk performance analyser...
Non-ejectable volumes
Problem with SCSI HD
PageMaker 2.0 (3 messages)
Alisa = VAX + Mac
100mb SCSI
RE: 100mb SCSI (Re: Msg 13645)
Micah Drive still around? (2 messages)
Fast Printer (2 messages)
Heap Fragmentation Problem
RE: Cooling fans
INIT 31 mechanism (3 messages)
s/w dev tools
HyperDrive FX/20
code segments (2 messages)
Usenut Digest Vol. 3 #54
[ ARCHIVED AS
[SUMEX-AIM.Stanford.EDU]DELPHIV2-51.ARC
DAVEG
]
------------------------------
Date: 12 Oct 86 11:02:33 EDT
From: Jeffrey Shulman
Subject: Disk Verify
[ Uploaded from Delphi by Jeff Shulman ]
Name: DISK VERIFY
Date: 11-OCT-1986 16:30 by HSTARR
Here is a handy utility to check the formatting of your diskettes. It is non
destructive, and will check non-Macintosh (but Apple formatted) diskettes. This
will allow you to determine if those single sided disks really can be used as
double sided. Also good for a double check after a few days. Send comments and
suggestions to HSTARR.
[ ARCHIVED AS
[SUMEX-AIM.Stanford.EDU]UTILITY-DISKVERIFY.HQX
DAVEG
]
------------------------------
Date: Fri, 10 Oct 86 08:16 EST
From: CML5A9%[email protected]
Subject: Re: MacKermit Fonts
There was recently a question about Kermit fonts and
their readability.
I have taken head responsibility for the MacKermit
project, which has not been worked on in a year.
We are currently converting it to a native Mac C compiler
(Prototyping in Lightspeed C with final product in MPW C)
and are going to add the Kermit sliding window protcol,
TEK4010 support (we hope), as well as cleaning up some
of the Mac Plus incompatabilities. We can certainly look
into the font problem, and this is just a guess but I
would imagine that the original font was intended to
"emulate" the look of a VT100. If it isn't all that
close I could certainly mess with it a bit. It could
simply be changed with ResEdit if it bothers you now.
However, Geneva 10 (as was suggested) will not work, as
Kermit requires a monospaced font...
If anyone else out there has something to contribute to
the MacKermit project, feel free to drop me a line and
we'll see what you can do. The project is currently
myself and one other person, but we are going to probably
pick up a third in a bit. This is going to be some
high powered Mac and C work, so don't jump on the boat
just for fun.
We don't have a tentative release date yet, but I am
hoping to have the code native by next week sometime.
-Tom Dowdy
[email protected]
"I am increasinly of the opinion that a vast majority
of wrong thinking people are right."
------------------------------
Date: Thu, 9 Oct 86 21:38:26 cdt
From: [email protected] (Wiley Sanders)
Subject: FanMania (Really, Mac's operating temp)
Reply-to: [email protected] (Wiley Sanders)
Well, I took a dial-type photo thermometer and laid it level along the left
hand vent of several different Macs and Mac Pluses here in our microlab.
The 512K's seem to run about 130F. and the Pluses about 115.
-w
------------------------------
Date: Sat, 11 Oct 86 12:53:01 edt
From: Christopher North
Subject: fans
*** REPLACE THIS LINE WITH YOUR MESSAGE ***
I have been using a system saver mac from kensington ($65 from maconnection)
and I love it. Prior to using I had two power board failures presumably heat
related as they both occurred during heavy usage perids. Sure, it makes a
little bit of noise but it is nothing that bothers me. It sits very snugly
on top of the mac but I do not have to remove it during transport because
it fits right in my mac pack.
------------------------------
Date: Tue, 7 Oct 86 15:05 EDT
From: JDM%SMVL%[email protected]
Subject: Rentals Registration
I take it back. No sooner do I post my story than the Lightspeed C and
Pascal Registration cards/Licenses appear in a battered envelope in my
mailbox. Apparently, they were mailed quite promptly by MacRentals. They
were probably mishandled by the good 'ol US Mail people. So, I can now
use the tools without guilt.
Joe
------------------------------
Date: Fri, 10 Oct 86 21:53:48 jst
From: nttlab![email protected] (Hisao NOJIMA)
Subject: Japanese Word Processing on Mac
Hello
I read Tamir Weiner on Japanese WordProcessor on Mac. I am a Mac
user living in Japan.
As Tamir wrote, KANJI-Talk is a kind of software adaptar for Mac,
which allows user to use Kanjis in several Mac applications. (Excel,
MacWrite, MacPaint and others)
We have a Word Processor for Mac, EGword from ErgoSoft. I have
tried it on Mac512, but not on Mac+. (I have to upgrade the software,
but I haven't done so.)
EGword on Mac512 worked well, but as the quality of the printed drafts
were quite low and slow (you have to wait about four or five minutes to
get only one page of printouts), so I didn't use it seriously.
But, now you can use EzPrint (from Hi-TECS), which allows you to
print EgWord files to Kanji printers (EPSON VP-80K, VP-130K), so
accordingly you can get high quality output quickly.
I hope Apple Japan or some other companies try hard to make it
possible to print Kanji files to LaserWriters. (and we need mcuh
bigger screen and finer resolution. Most Japanese personal computers
have 640 * 400 pixels, on which we can display 40*25 kanjis, however,
on Mac we can display about 23*13 kanjis.)
Until then, Japanese word processing on Mac may remains far back
behind with contenporary levels of Japanese Word Processing softwares,
like ICHI-TAROU, which is the best selling word processing software
for NEC PC9800.
Hisao NOJIMA
------------------------------
Date: Fri, 10 Oct 86 01:21 CDT
From:
Subject: MacApp Developer's Association
Here it is, just like I promised.
Announcing the MacApp Developer's Association.
MacApp users are proud to announce the formation of the MacApp Developer's
Association. Our goal is to provide technical support and information
to our fellow developers who are using Object Oriented Programming
languages. We will publish a regular (hopefully monthly) newsletter
addressing the concerns of MacApp users. We will provide, maintain,
and support an Object Library for developers. As a developers
association we feel it is important to provide an informal electronic
mail Q&A service for out members where you can get answers to your
MacApp questions. We will provide support for the formation of local
MacApp user groups.
Our original organizing effort is supported by Apple Computer but we
anticipate being a fully indepenent organization through your participation
and support. We are looking for volunteers able to contribute to the
above efforts. If you have an article, an idea for an object, or a
tutorial to contribute to the newsletter you should contact Eric
Anderson (addresses are listed below). If you wish to contribute an
object to the Object Library contact Kurt Schmucker concerning documentation
details. If you would like to participate in the Q&A service contact
Greg Marriott or Scott Boyd. If you wish to form a local support group
or are looking for local support contact Carl Nelson.
To receive the first 6 newsletters we are asking that you make a contribution
of $15 to cover the costs of its printing, production and postage. Send
your name, address, and check to the MacApp Developers Association.
Details concerning access and distribution of the object library will
be published in our first newsletter. Tentatively the Q&A service will
be conducted using MCI mail. The cost to join is low, there are no
connect charges and the price to send a short, well phrased question is
a dollar or less; contact MCI at 1-800-MCI-MAIL to obtain an account.
The MCI mail ID is MacApp Questions. The most useful Q&A's will appear
in each newsletter.
We hope to hear from you and look forward to seeing you at our next
meeting, to be held during the January 198 MacWorld Expo in San Francisco.
-
MacApp(tm) Developer's Association
P.O. Box 23
Everett, WA 98201-0023
MCI: Carl Nelson
USENET: uw-beaver!tikal!sunup!chn
Greg Marriott/Scott Boyd
3420 D Sandra St.
Bryan, TX 77801
MCI: MacApp Questions
Greg Marriott
BITnet: [email protected]
[email protected]
[email protected]
CSNet: boyd%[email protected]
general:boyd%tamlsr%[email protected]
Kurt Schmucker
PPI
2516 Vineyard Lane
Crofton, MD 21114
BIX: kschmucker
Eric Anderson
P.O. box 1145
Montpelier, VT 05602
MCI: Tomevs
-
Greg Marriott
%-b
-
Whew. Disclaimer: I have no official connection with Apple Computer.
I'm not getting paid to do this. I'm paying my
$15 just like every other member.
------------------------------
Date: Sat, 11 Oct 86 01:26:46 EDT
From: cordy%[email protected]
Subject: Requesting info on new faster Laserwriter?
I have heard rumours that Adobe has created a new fast 68020-based
controller to go into Laserwriters and such. I presume this means
that we will shortly see announcements of a Laserwriter II or somesuch,
rendering the present Laserwriter obsolete (or at least slow).
Does anyone have any solid information on the existence and predicted
birth date of such as beast? I want to know if we should wait for it or
go ahead and shell out the bucks for the present slow Laserwriter.
Thanks in advance
Jim Cordy [email protected]
Dept. Computing and Information Science decvax!utcsri!qucis!cordy
Queen's University at Kingston
Kingston Canada
------------------------------
Date: 11 Oct 1986 15:22-EST
From: [email protected]
Subject: Looking for DS Disk Bulk Copier
I have been given the task of creating about 50 double-sided disks for
public use in clusters here at Carnegie Mellon. The disks are made up
and contain invisible files and other such nonsense. Does anyone know
of a PD or cheap commercial bulk double-sided disk copier? It should be
a 'read master disk and then feed in blanks' based system. It doesn't
have to deal with any protection - just a normal sector copy should do.
I have an old PD program called MassCopy, but it doesn't seem to know
how to deal with double sided disks. Any help is appreciated.
Also - I want some of the files on the disk (namely Paint and Write) to
not be able to be drag copied by J Random User. But the bozo bit
doesn't seem to do anything on an HFS volume - any help here?
Thanks, Marc
------------------------------
Date: Fri, 10 Oct 86 09:21 EDT
From: CNNMJ%[email protected] (M.J. CONNOLLY
Subject: Woke up this mornin', got them blue-bashin' blues.
My 10 September issue of Punch just arrived. Punch, you ask? Well, you
see, when Michael Bywater is in form, his Database page does wonders
for one's spirits. Like the following excerpt from his Q/A discussion
on the Amstrad PC-1512, which costs eight to ten times less than a
similarly configured IBM PC, runs pretty much all the PC stuff along
with its own GEMware, and is faster. The cherry comes at the bottom
of the glass:
> What reason, then, is there to buy a real IBM?
> --Absolutely none whatever.
>
> What will this mean for IBM?
> --The bum's rush; and, my goodness, they've had it coming to them
> for a long time.
>...
> So to sum up?
> --If you want an IBM PC, buy an Amstrad. If you already have an
> IBM PC and want another one, buy an Amstrad. If you haven't got
> a computer at all and don't want to spend much, buy an Amstrad.
> If you haven't got a computer but vaguely feel one would be useful,
> don't buy anything; wait until you have good reason to buy one,
> then buy an Amstrad. If you don't mind spending L2,000 and want the
> best computer on the market right now, buy an Apple Macintosh Plus.
Prof M.J. Connolly
Slavic & Eastern Languages
Boston College/Carney 239
Chestnut Hill MA 02167 (617) 552-3912 [email protected]
------------------------------
End of INFO-MAC Digest
**********************