MacKermit connect mode
Posted: December 20th, 1984, 2:56 am
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 UW 5/3/83; site uw-beaver
Path: utzoo!watmath!clyde!burl!ulysses!mhuxj!houxm!vax135!cornell!uw-beaver!info-mac
From: info-mac@uw-beaver (info-mac)
Newsgroups: fa.info-mac
Subject: MacKermit connect mode
Message-ID:
Date: Wed, 21-Nov-84 21:30:27 EST
Article-I.D.: uw-beave.2309
Posted: Wed Nov 21 21:30:27 1984
Date-Received: Wed, 28-Nov-84 03:35:12 EST
Sender: yenbut@uw-beave
Organization: U of Washington Computer Science
Lines: 13
From: Jyh-Jye Yeh
I found what is wrong with MacKermit connect mode in dialing out at 1200 baud.
I have to choose 9600 baud at first and then choose 1200 baud in the control
options in order to link to Apple modem. If I don't point to 9600 baud and click
it, but fix at 1200 baud, then MacKermit won't send out commands to the modem.
This is not a major problem since I know how to get around with it already. The
other problem is that "backspace" dose not seem to work neither when I try to
dial out nor when I am talking to the host computer. Also, Emacs can not work
via MacKermit because the mode line is at the top instead of the bottom
J.J. Yeh
[email protected]
-------
Posting-Version: version B 2.10 UW 5/3/83; site uw-beaver
Path: utzoo!watmath!clyde!burl!ulysses!mhuxj!houxm!vax135!cornell!uw-beaver!info-mac
From: info-mac@uw-beaver (info-mac)
Newsgroups: fa.info-mac
Subject: MacKermit connect mode
Message-ID:
Date: Wed, 21-Nov-84 21:30:27 EST
Article-I.D.: uw-beave.2309
Posted: Wed Nov 21 21:30:27 1984
Date-Received: Wed, 28-Nov-84 03:35:12 EST
Sender: yenbut@uw-beave
Organization: U of Washington Computer Science
Lines: 13
From: Jyh-Jye Yeh
I found what is wrong with MacKermit connect mode in dialing out at 1200 baud.
I have to choose 9600 baud at first and then choose 1200 baud in the control
options in order to link to Apple modem. If I don't point to 9600 baud and click
it, but fix at 1200 baud, then MacKermit won't send out commands to the modem.
This is not a major problem since I know how to get around with it already. The
other problem is that "backspace" dose not seem to work neither when I try to
dial out nor when I am talking to the host computer. Also, Emacs can not work
via MacKermit because the mode line is at the top instead of the bottom
J.J. Yeh
[email protected]
-------